pancing

the dude with his gf or wife's chest in all the pictures?

Those batteries are expensive. You can use a high quality power bank just as long as it has a 2amp discharge (Power banks you buy without batteries and you supply the batteries) you just have to have the usb to 5.5mm adapter. If you go this route though, I am in no way responsible if your batteries :Blow up, burn you, leak, vent, or become dead or if any harm comes to you by taking this advice. That being said make sure you use high quality batteries IE Redilast, AW, Orbtronic or any IMR VTC3/4, samsung or LGchem.

eh its not too bad considering their minimum wage is around 24$ or so and the currency rate that turns to about 700 usd.

I really do like Dewalt and Hitachi's saws though.

Eh well i really, really need a miter saw. I cannot cut straight lines on a circular for the life of me without a level or a fence. Corded ones are around 150 ish anyway well the sliding 7 1/4 ones at least so i figured i may as well get a cordless one because of its weight! When they said this thing was light i didn't think it would be this light lol.

Nice! thats pretty If I wasn't such a tight ass about finding tool deals and only buying when they're on clearance or special I'd have everything I want lol!

I couldn't get the metabo mitersaw this cheap or AT ALL so this will have to suffice! Have at thee ridgid! There was once a time where I saw stacks upon stacks upon stacks of returned, defective ridgid batteries as a repair tech for HD I vowed never to buy a Ridgid anything yet here i am with their miter saw and cordless sander, guess they fixed heat/wire issue they had with the el-cheapo 3.0's on the 4.0's and 5.0's!

Welp thar she blows

oh hell man just when i thought I was done buying shit

Yeah, usually have to go to a manager employees usually dont know or don't care, they just work there, just keep trying till you get someone that says yes. When you run into this day in day out, you're either in the mood to say yes or not, 90% of the time someone else will buy it anyway so its usually not a loss. Just have to find someone that cares lol

Lol don't they have to honor it because if you call and bitch to corporate they'll get a nasty call/email from someone above them about how they have to honor this or make you happy. Just keep in mind they have a system to make you happy, Cashiers can do 50$ Managers 100$ assistant managers 500$ Store manager 1000$ Lowes adopted this policy as well! Don't let them know you know this obviously but use it to your advantage SPARINGLY!

wooooo hooo thats perdy man, If I wasn't such a tight ass on buying tools that go on clearance I'd be all over that grinder Let me know how you like the light! I know the heat sink fins are just for Looks but they get a bit warm so they can't just be for looks lol. You're going to enjoy that grinder man, brushed, brushless metabo grinders are great to use, though i'm not sure im going to be using my grinder(s) much! Now that I've got the bandsaw, until ive got enough money to put into my car I might have to get rid of some of my red lol.

I can't see a picture either

Never thought I'd have a use for a bandsaw but holy crappo is it useful and a lot less shaky and noisy cutting rebar! Don't know why I never thought about using a bandsaw for rebar lol its too bad you can't really replace the brushes on the tool as it looks like the brushes are encased.

Actually wait, i think you're right, Mine does move without the lever clockwise but when trying to move counter clockwise you need the lever, wth i never noticed that before, I usually have the guard in one position and never move it huh, glad you pointed that out, thats interesting

Did you get the brushed version if so the guard should lock once it gets to a point. Once you first put it in it should spin until it locks but once it locks you have to use the lever to move it again. If you have the brushless then i dont know because ive only used it and havent messed with the guard on that.

I really don't understand their logic on the 4.5 to - 6 inch grinders though they're just the same grinders but with bigger guards

Might be a great sell to rescue workers

The numbers are really confusing hopefully you picked the right one I just circled it lol

I dont think they make a fuel jigsaw or flex jig but id be a over that also which kit dkd you end up gettong

Ive got 3 of the non brushless cordless 4.5 grinders and i use them quite a bit working on my car and cutting rebar at work. I dont have the lihd batteries only the 5.2 batteries. It doesnt slow down at all and ive never had it stop on me though ive never tried or had to overoad any of them. I would get a 5.2 non brushless kit as they last about 15minutes of constant load and it can match a 6amp 4.5 corded. But if you want lihd the batteries add more power to my grinder and last longer. 5.5 would be good enough for what i do. Also the brushless and brushed model metabos dont have have a discernable performance difference but brushless is smaller slimmer and lighter also considerably more expensive. You dont need to go through a dealer for the rebate as well i bought a drill from ebay from some random and submitted and they came through. You can find the non brushed models for around 150 to 200.

yeah they are specific but milwaukee has the Lithium Ion battery patent so I'm sure other companies will find a way to get around it and dewalt will defend their patent.

kits come with a 1 3.0ah battery and charger

looks like hitachi has a 18 16 and an angled 15 brushless nailers @ lowes in my area now hum. Pretty pricy though 309 359 379 I don't know how they would even compare to the other brushless nailers but They're priced a bit high for hitachi.

I believe Dewalt holds the patent to the Corded power adapter AND the stick battery to slide battery adapter as well. So I'm not sure how milwaukee will get around that.