Theultimatehic Posted January 19, 2017 Report Share Posted January 19, 2017 My milwakee one is annoying so i bought the dewalt to try out. 8 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 19, 2017 Report Share Posted January 19, 2017 25 minutes ago, Theultimatehic said: My milwakee one is annoying so i bought the dewalt to try out. Everyone loves this adapter. I've never seen the Milwaukee out in the wild, I do however, have the 30 degree impact driver adapter, priceless. 1 Quote Link to comment Share on other sites More sharing options...
Theultimatehic Posted January 19, 2017 Report Share Posted January 19, 2017 30 degree huh. Gonna look into that.. Quote Link to comment Share on other sites More sharing options...
Bremon Posted January 20, 2017 Report Share Posted January 20, 2017 I have the Milwaukee 30 degree but the Dewalt right angle is on my short list. Quote Link to comment Share on other sites More sharing options...
Theultimatehic Posted January 20, 2017 Report Share Posted January 20, 2017 It worked great today. The milwakee 90 will be my loaner now. Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 20, 2017 Report Share Posted January 20, 2017 8 minutes ago, Theultimatehic said: 30 degree huh. Gonna look into that.. .. 3 Quote Link to comment Share on other sites More sharing options...
Todd the Tinkerer Posted January 20, 2017 Report Share Posted January 20, 2017 I wish I had never found this thread. It makes me want to buy more tools constantly because of all the cool tools everyone else buys. Then I am like boy I could use that tool too. Sent from my iPhone using Tapatalk 3 Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 20, 2017 Report Share Posted January 20, 2017 13 minutes ago, tcoscarelli said: I wish I had never found this thread. It makes me want to buy more tools constantly because of all the cool tools everyone else buys. Then I am like boy I could use that tool too. Sent from my iPhone using Tapatalk MUAAAHHAHAHHAHA YES WE GOT HIM!!!! SUCKAAA ... ahhaha Oh yes, we all lament this very same experience... 3 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 20, 2017 Author Report Share Posted January 20, 2017 I have the dewalt right and angle and the Milwaukee 30, gotta say I never use the dewalt, it's good just haven't really had to do anything I couldn't fit a right angle drill in, now the Milwaukee pivot I've used quite a bit that ones great for off set and odd anglesSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
comp56 Posted January 20, 2017 Report Share Posted January 20, 2017 got these for 20 bucks..... 9 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 20, 2017 Author Report Share Posted January 20, 2017 47 minutes ago, comp56 said: got these for 20 bucks..... Not a bad deal, the only thing i don't like about the milwaukee set, or the dewalt set is the non indicting grip side still is the same color as the indicating grip side, they should have just made the milwaukee grip all black, thats the only thing that kept me from picking them up 1 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted January 20, 2017 Report Share Posted January 20, 2017 4 hours ago, jtkendall said: No, I actually had never heard of Witte before, but saw the name on KC Tools so I figured they were German and higher quality than the others I saw. Sent from my iPhone using Tapatalk They're great drivers, they make the Knipex screwdrivers(that look exactly like yours) and screwdrivers for Matco. The Maxxpro specifically are the premium Matco screwdriver, it has a felt-like texture on the grip panels. I bought my Maxxpros through Sears with SYW points, one at a time. 2 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted January 20, 2017 Report Share Posted January 20, 2017 4 hours ago, KnarlyCarl said: Everyone loves this adapter. I've never seen the Milwaukee out in the wild, I do however, have the 30 degree impact driver adapter, priceless. I love that adapter. I want the thin flexible Dewalt adapter though, that one probably would all but retire the Milwaukee. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted January 20, 2017 Report Share Posted January 20, 2017 Well I bought it two weeks ago but it just came in. I had the Milwaukee before, this feels more refined and well balance and I really like the LED work light and the fact that it comes in an lboxx insert and has a little accessory box with an extra collet clamp and a mandrel as well as an extra nose piece. Six speeds 5000-35000 rpm, and both the power switch and speed dial are much easier to move on the Bosch than on the Milwaukee. Also this is NAINA and I purchased it through Axminster Tools in the U.K. 12 Quote Link to comment Share on other sites More sharing options...
Bremon Posted January 20, 2017 Report Share Posted January 20, 2017 18 hours ago, JimboS1ice said: I have the dewalt right and angle and the Milwaukee 30, gotta say I never use the dewalt, it's good just haven't really had to do anything I couldn't fit a right angle drill in, now the Milwaukee pivot I've used quite a bit that ones great for off set and odd angles Sent from my iPhone using Tapatalk I'm hoping that the Dewalt is capable enough I don't need to buy a regular wimpy right angle drill at all. Difference between $20 and $110 CAD can go towards something more fun lol. Quote Link to comment Share on other sites More sharing options...
jtkendall Posted January 20, 2017 Report Share Posted January 20, 2017 (edited) Well my delivery today was a big disappointment. Only the slotted Witte screwdriver showed up, packing slip has both listed and there is nothing on Sears about the other being backordered so I'm now on chat with Griffen at Sears while he looks into it. Not thrilled about this. Also the screwdriver is lighter than I thought it would be, I thought they had sent an empty box until I located the one stuck in the craft paper. Did some more searching and the Phillips was nowhere to be found. On top of that I am bidding on a 2 pack of Makita 2.0ah batteries on eBay and the outbid notification came in right after I discovered the missing screwdriver. Upped the bid so hopefully ending up with the batteries when the auction ends tonight. Edit: Apparently the Phillips is shipping separately… this box could have held dozens of them. Doesn't seem like a good shipping practice to ship two very small and light things in two separate shipments via UPS. It should be here by the 24th. Edited January 20, 2017 by jtkendall Heard back from Griffin 2 Quote Link to comment Share on other sites More sharing options...
Bremon Posted January 20, 2017 Report Share Posted January 20, 2017 Same thing happened to me @jtkendall, 5" pliers wrench shipped in a shoebox, 5" cobra and 12" cobra shipped in a massive box. Mind boggling. Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 20, 2017 Author Report Share Posted January 20, 2017 Well I bought it two weeks ago but it just came in. I had the Milwaukee before, this feels more refined and well balance and I really like the LED work light and the fact that it comes in an lboxx insert and has a little accessory box with an extra collet clamp and a mandrel as well as an extra nose piece. Six speeds 5000-35000 rpm, and both the power switch and speed dial are much easier to move on the Bosch than on the Milwaukee. Also this is NAINA and I purchased it through Axminster Tools in the U.K.Wow dude that looks really nice don't know why they wouldn't market that here I love my cordless Milwaukee one about my favorite m12 toolHere's my haul boys hd had these clamps hidden for only 20 bucks each, couldn't pass so I grabbed two might go back and grab more, also check your paint department for this brush kit for only 9 bucks plus a cleaner comb Sent from my iPhone using Tapatalk 6 Quote Link to comment Share on other sites More sharing options...
Foneguy Posted January 20, 2017 Report Share Posted January 20, 2017 Wow dude that looks really nice don't know why they wouldn't market that here I love my cordless Milwaukee one about my favorite m12 toolHere's my haul boys hd had these clamps hidden for only 20 bucks each, couldn't pass so I grabbed two might go back and grab more, also check your paint department for this brush kit for only 9 bucks plus a cleaner comb Sent from my iPhone using TapatalkSweet score on clamps !!!Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
dwasifar Posted January 21, 2017 Report Share Posted January 21, 2017 5 hours ago, ChrisK said: Well I bought it two weeks ago but it just came in. I had the Milwaukee before, this feels more refined and well balance and I really like the LED work light and the fact that it comes in an lboxx insert and has a little accessory box with an extra collet clamp and a mandrel as well as an extra nose piece. Six speeds 5000-35000 rpm, and both the power switch and speed dial are much easier to move on the Bosch than on the Milwaukee. Also this is NAINA and I purchased it through Axminster Tools in the U.K. Sweet! I assume Dremel bits interchange? If so, I would surely like a link to where you got it. (edit) Never mind, found it. Whoo, that's pricey. Quote Link to comment Share on other sites More sharing options...
ChrisK Posted January 21, 2017 Report Share Posted January 21, 2017 2 minutes ago, dwasifar said: Sweet! I assume Dremel bits interchange? If so, I would surely like a link to where you got it. Yup, all standard Drexel bits and even attachments for the tool. The site is Axminster http://www.axminster.co.uk/bosch-gro-10-8-v-li-cordless-rotary-multi-tool-10-8v-body-only-506198 Quote Link to comment Share on other sites More sharing options...
jtkendall Posted January 21, 2017 Report Share Posted January 21, 2017 Didn't win either auction for Makita batteries, which sucks since I have a $15 eBay coupon. They would be a steal at $60 and an even bigger steal at $45 what would be less than half price for two 2.0ah batteries. Gave up on trying to find something on eBay and bought a set of Milescraft drill bit stop collars because depth stops will come in handy. If anyone needs one of these sets of stop collars Sears was <$9 shipped whereas Milescraft wanted around $13 with shipping. Sears is actually shipping from WoodCraft so if you have one of them nearby the collar kit runs $4. I'm unlucky in that there is no WoodCraft or Rockler nearby. 4 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted January 21, 2017 Report Share Posted January 21, 2017 I bought a bunch of cables/test leads/adapters: 7 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 22, 2017 Author Report Share Posted January 22, 2017 Sent from my iPad using Tapatalk 6 Quote Link to comment Share on other sites More sharing options...
The.Handyman Posted January 22, 2017 Report Share Posted January 22, 2017 Picked these up to try. 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.