ChrisK Posted January 19, 2016 Report Share Posted January 19, 2016 Also bought a 19mm Craftsman wrench for one of my routers. Ends up made in China. It didn't say it but the code on the side is a Chinese manufacturing location. Still a really nice heavy duty wrench. And it was the missing one from the Gearwrench set of ratcheting ones I picked up a few weeks ago. Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 I bought the Sawstop CNS175-TGPS36 Contractor saw with pro fence. Ouch. Got a crackin' deal through a third part sellers me save $750 bucks! I should have it next TuesdayWhere did you get it? So you got a Sawstop for around 600 dollar's?Millerz Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 Definitely, sooner better than later. If you have in mind to put Drano or the like down the drain, it almost always clears a portion of the pipe, but sending the loose debris down further, but in large section/chunks, and will cause a worse blockage. This is why we usually don't see that type of stuff work as the homeowner inteded. If you run a snake through, it will break the blockage up real nice, in smaller pieces, or a slurry, and will clear/flush out easier.Draino helped a little. Bit still needs somthing done to it. Still drains slowMillerz Quote Link to comment Share on other sites More sharing options...
comp56 Posted January 19, 2016 Report Share Posted January 19, 2016 Where did you get it? So you got a Sawstop for around 600 dollar's?MillerzI'd say closer to $1200 1 Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 That's how much the contractor one cost. Millerz Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 The jobsite is 1299 and contractor is 1499Millerz Quote Link to comment Share on other sites More sharing options...
comp56 Posted January 19, 2016 Report Share Posted January 19, 2016 http://www.acmetools.com/shop/tools/sawstop-cns175-tgp36-1-75-hp-contractor-saw Quote Link to comment Share on other sites More sharing options...
NicholasShetley Posted January 19, 2016 Report Share Posted January 19, 2016 I bought the Sawstop CNS175-TGPS36 Contractor saw with pro fence. Ouch. Got a crackin' deal through a third part sellers me save $750 bucks! I should have it next TuesdayNice saw Chris! You have been wanting that se for a while haven't you. Quote Link to comment Share on other sites More sharing options...
kruton Posted January 19, 2016 Report Share Posted January 19, 2016 That's a sick saw Chris! I hope you didn't get it for cutting up your hot dogs because it won't work. [emoji6] I really need to get myself a decent table saw. The saw stop is nice but a little too rich for my blood right now. Sent from my SM-N900V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
John Glassey Posted January 19, 2016 Report Share Posted January 19, 2016 I bought the Sawstop CNS175-TGPS36 Contractor saw with pro fence. Ouch. Got a crackin' deal through a third part sellers me save $750 bucks! I should have it next TuesdayI hope I had no part in this lol. Nice saw by the way, you'll need to post pics when you get it . Puts my old chaftsman contractor to Shame. ;(. 1 Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 19, 2016 Author Report Share Posted January 19, 2016 You got your saw dude!JimboSent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted January 19, 2016 Report Share Posted January 19, 2016 Comp wins! Contractor with the 36" pro fence and the extended cast iron wings! I got it on eBay from a reputable seller, brand new in box! I'm thinking the store buys out closed stores inventory. Anyways retails for $1949 ish? $1250 save 7 bones! Selling my DW745 to make room for this guy! I have been shelling away money for a while now for a table saw and my Wife wouldn't let me go with a regular saw. 2 Quote Link to comment Share on other sites More sharing options...
ChrisK Posted January 19, 2016 Report Share Posted January 19, 2016 Nope John! I bought it this morning! You just got some awesome tools collecting dust! No I'll sell my DW745 to put back in the piggy bank but this was something I had been saving up for and watching like a hawk for months now. Quote Link to comment Share on other sites More sharing options...
iam76 Posted January 19, 2016 Report Share Posted January 19, 2016 http://www.dewalt.com/tools/nailers-cordless-nailers-dcn660b.aspxhttp://www.dewalt.com/tools/cordless-nailers-dcn692b.aspxGot my two nailers off the company store. Tried the dcn660b. Its awesome.Will try the framer tomorrow Quote Link to comment Share on other sites More sharing options...
John Glassey Posted January 19, 2016 Report Share Posted January 19, 2016 I'm glad Chris, I would hate to think that I'm an enabler. Bad enough I enable myself! Doesn't sound right. Haha. Does not take much for this group of guys to buy tools! Just a little,,, PUSH!!! Hehe. . Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 19, 2016 Report Share Posted January 19, 2016 http://www.dewalt.com/tools/nailers-cordless-nailers-dcn660b.aspxhttp://www.dewalt.com/tools/cordless-nailers-dcn692b.aspxGot my two nailers off the company store.Tried the dcn660b. Its awesome.Will try the framer tomorrow I think Dan said he's giving away a 660 nailer, unless I'm incorrect on the model number, I really want to see who gets it when the time comes Quote Link to comment Share on other sites More sharing options...
KnarlyCarl Posted January 19, 2016 Report Share Posted January 19, 2016 Christopher is it? What's your story, where you from? 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted January 19, 2016 Report Share Posted January 19, 2016 Congrats Chris!! I know your not gonna miss the 745 with that badboy Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 The standard 30 in is 1499 or 1599. All I need is the jobsite one. Its 1299. Do they sell them too? Or is it you get what they got kinda thing? I been watching the saw stop for almost 2years. They'll go down sometime. LolMillerz Quote Link to comment Share on other sites More sharing options...
Millerzconstruction Posted January 19, 2016 Report Share Posted January 19, 2016 http://www.sawstop.com/table-saws/by-model/contractor-saw#build-price/contractor-saw_SFA30_0Millerz Quote Link to comment Share on other sites More sharing options...
FerTheHandyman Posted January 19, 2016 Report Share Posted January 19, 2016 I got a oscillating spindle sander and some 6" bessey clamps at hd they had a six pack for $15 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted January 19, 2016 Report Share Posted January 19, 2016 I got a oscillating spindle sander and some 6" bessey clamps at hd they had a six pack for $15. DUDE where have u been at bro?? Glad to see you back!! Quote Link to comment Share on other sites More sharing options...
ChrisK Posted January 19, 2016 Report Share Posted January 19, 2016 http://www.sawstop.com/table-saws/by-model/contractor-saw#build-price/contractor-saw_SFA30_0Millerzhttp://www.amazon.com/CNS175-TGP36-Contractor-Professional-including-Extension/dp/B006G36VHGThis is the one here Quote Link to comment Share on other sites More sharing options...
JimboS1ice Posted January 19, 2016 Author Report Share Posted January 19, 2016 Your going to love that saw dude, she's a beaut.JimboSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
iam76 Posted January 19, 2016 Report Share Posted January 19, 2016 Christopher is it? What's your story, where you from? not sure why its displaying my first name... but whatever.. my story.. i am from connecticut and work for stanley black & decker currently in marketing design web dev... New home owner... been a longtime viewer of the content tools in action produces. finally thought to join up on here as god knows i may have questions issues in the future being a first time home owner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.