rrich1 Posted March 16, 2019 Report Share Posted March 16, 2019 Picked up the 20v DeWalt grease gun Sent from my ONEPLUS A6013 using TapatalkI've been contemplating buying this. Since I am getting a 1931 Ford model AA I'll need to grease the fittings a lot. I don't have any DeWalt tools though. Sent from my Pixel XL using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
rcarnes911 Posted March 16, 2019 Report Share Posted March 16, 2019 I've been contemplating buying this. Since I am getting a 1931 Ford model AA I'll need to grease the fittings a lot. I don't have any DeWalt tools though. Sent from my Pixel XL using TapatalkSo far I like it but it is a pain in the ass to load and it weighs a fucking tonSent from my ONEPLUS A6013 using Tapatalk Quote Link to comment Share on other sites More sharing options...
fm2176 Posted March 17, 2019 Report Share Posted March 17, 2019 Well, I picked up a Ryobi impact driver kit for $39 yesterday, as well as their high volume inflator for $8 or so. I didn't need either, having DeWalt, Milwaukee, and Ridgid brushless impact drivers as well as the DeWalt jobsite blower (with inflator nozzles) and 20v Max inflator, M12 inflator, and Ridgid 18v compressor, but the price was right, and I have more tools to eventually destroy...👹 Quote Link to comment Share on other sites More sharing options...
ToolBane Posted March 17, 2019 Report Share Posted March 17, 2019 4 hours ago, fm2176 said: Well, I picked up a Ryobi impact driver kit for $39 yesterday, as well as their high volume inflator for $8 or so. I didn't need either, having DeWalt, Milwaukee, and Ridgid brushless impact drivers as well as the DeWalt jobsite blower (with inflator nozzles) and 20v Max inflator, M12 inflator, and Ridgid 18v compressor, but the price was right, and I have more tools to eventually destroy...👹 Those are surprisingly low prices even for Ryobi! And I’d say yeah maybe you don’t need more but somehow I’ve accumulated 5 impacts myself and am not even sure how I got here. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted March 17, 2019 Report Share Posted March 17, 2019 22 hours ago, rrich1 said: I've been contemplating buying this. Since I am getting a 1931 Ford model AA I'll need to grease the fittings a lot. I don't have any DeWalt tools though. Sent from my Pixel XL using Tapatalk Acme Tool has a promotion going on for St Patricks day for 15% off. it works with the DCGG571 Quote Link to comment Share on other sites More sharing options...
SignsEHT Posted March 18, 2019 Report Share Posted March 18, 2019 Milwaukee high torque impact wrench and protective boot. This thing is a beast. Quote Link to comment Share on other sites More sharing options...
Biggie Posted March 19, 2019 Report Share Posted March 19, 2019 I would have liked to have held out for the 8.0 but I got a good deal on these. 1 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted March 19, 2019 Report Share Posted March 19, 2019 2 hours ago, Biggie said: I would have liked to have held out for the 8.0 but I got a good deal on these. eBay?? I've been trying hard not to bite on those, I don't REALLY need them. Quote Link to comment Share on other sites More sharing options...
Biggie Posted March 19, 2019 Report Share Posted March 19, 2019 Yep ebay and I've been trying not to as well especially since the 8.0 were announced. But I know I'm going to be buying the new 6" grinder when it comes out and I don't have any HO batteries. As much as I want the 8.0 I'm guessing a pair will be over $200 for awhile and the 6.0s were $115. 1 Quote Link to comment Share on other sites More sharing options...
King DORK Posted March 19, 2019 Report Share Posted March 19, 2019 Great deal on the Dewalt 735x (in feed and out feed tables/extra set of knives) planer and Dewalt planer stand included on the way, courtesy of my wife. Been eyeballing this planer for a while so I'm pretty excited. Don't know what I do to deserve it, but she spoils me when it comes to my "tool cravings ". 1 Quote Link to comment Share on other sites More sharing options...
rrich1 Posted March 20, 2019 Report Share Posted March 20, 2019 Ordered the Incra aluminum router plate with mag lock rings. Seems nice and heavy duty. Also ordered a template to make my life easy. I thought I was going to have to drill a hole for the above table adjustment but I guess not. The only issue is that it is on the back right and not the front lest like the kreg plate. This rotates the router. If I don't like it this way I'll rotate it and drill a hole where it won't be so close to the fence. Sent from my Pixel XL using Tapatalk 4 Quote Link to comment Share on other sites More sharing options...
Jronman Posted March 26, 2019 Report Share Posted March 26, 2019 I bought a Scag mower. 2 Quote Link to comment Share on other sites More sharing options...
Babysaw Posted March 26, 2019 Report Share Posted March 26, 2019 Picked up the Dewalt mid range wrench today. 2 Quote Link to comment Share on other sites More sharing options...
SignsEHT Posted March 27, 2019 Report Share Posted March 27, 2019 Reconditioned M18 Fuel Surge, and a Packout Compact organizer, removed the bins from the organizer and added Minicell foam. I think Milwaukee should sell Packout tool boxes that size. 3 Quote Link to comment Share on other sites More sharing options...
OldDominionDIYer Posted March 28, 2019 Report Share Posted March 28, 2019 I picked up a new Milwaukee M18 FUEL 1/4" Hex Impact Driver and I'm really loving it. I have an older M12 version that I use all the time, but recently I have been doing a lot of concrete fasteners and felt like the extra torque offered by this newer model would be beneficial, and as it turns out it is. Not only that but all that extra power and speed are packaged in a smaller compact package that is barely three tenths of a pound heavier than my old M12 version. Win-Win! I have found the "soft start" feature (Self tapping screw mode in Milwaukee lingo) enabled through mode 4 is really handy and a welcome addition. If I had any feedback to Milwaukee it would be to offer the three current speed modes and a fourth option that enables the soft start option in any of the three speed modes. Quote Link to comment Share on other sites More sharing options...
Matty Alou Posted April 7, 2019 Report Share Posted April 7, 2019 Picked up a set of Wera precision screwdrivers. Slotted/Phillips Quote Link to comment Share on other sites More sharing options...
Jronman Posted April 7, 2019 Report Share Posted April 7, 2019 I bought a PJ 77x12' utility trailer. I had to drive 60 miles to the nearest place that sells PJ but it was worth it. I wanted a trailer that I would know is built well and would last. 1 Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted April 8, 2019 Report Share Posted April 8, 2019 I bought a PJ 77x12' utility trailer. I had to drive 60 miles to the nearest place that sells PJ but it was worth it. I wanted a trailer that I would know is built well and would last.That’s a long ass trailer!Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Jronman Posted April 9, 2019 Report Share Posted April 9, 2019 On 4/7/2019 at 8:15 PM, HiltiWpg said: That’s a long ass trailer! Sent from my iPad using Tapatalk long? haha I actually went with the shorter option. Quote Link to comment Share on other sites More sharing options...
HiltiWpg Posted April 10, 2019 Report Share Posted April 10, 2019 Looks like 77x12 feet!Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Mordekyle Posted April 12, 2019 Report Share Posted April 12, 2019 Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
BMack37 Posted April 13, 2019 Report Share Posted April 13, 2019 On 4/9/2019 at 10:40 PM, HiltiWpg said: Looks like 77x12 feet! Sent from my iPad using Tapatalk Really wide but short trailer! 1 Quote Link to comment Share on other sites More sharing options...
Jeff91 Posted April 13, 2019 Report Share Posted April 13, 2019 Not today but few days back i bought a corded jigsaw from Bosch. Quote Link to comment Share on other sites More sharing options...
rrich1 Posted April 13, 2019 Report Share Posted April 13, 2019 Picked up a stahwhille tool box from a KC tool deal of the day last month. Also got a set of wera chisel drivers. Both of these will be dedicated to the model A when I get it later this month. Sent from my Pixel XL using Tapatalk 3 Quote Link to comment Share on other sites More sharing options...
Jronman Posted April 14, 2019 Report Share Posted April 14, 2019 On 4/12/2019 at 11:01 PM, BMack37 said: Really wide but short trailer! It was actually the more narrow option. I could have gotten an 83 in wide. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.