Bigmikez Posted January 3, 2021 Report Share Posted January 3, 2021 Here’s a lil impact tool porn lol man it feels good to get them back and upgraded after my truck was stolen with my other older models.. 2 Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted January 4, 2021 Report Share Posted January 4, 2021 Someone scored some cool new tools. Nice Bigmike. 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted January 4, 2021 Report Share Posted January 4, 2021 28 minutes ago, Eric - TIA said: Someone scored some cool new tools. Nice Bigmike. Thanks Eric! Sucks it took me so long to get them back dang rat bastards stole my truck last year with about 2k of tools so I’m happy to almost be back at we’re i once was just sucks I could’ve spent on other new cool tools. Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted January 4, 2021 Report Share Posted January 4, 2021 Yes, that does suck. My buddy just had his van broken into and they took all his tools. 1 Quote Link to comment Share on other sites More sharing options...
Bigmikez Posted January 4, 2021 Report Share Posted January 4, 2021 1 hour ago, Eric - TIA said: Yes, that does suck. My buddy just had his van broken into and they took all his tools. Really sucks! They took everything inside clothes, stereo and tools plus they took my rims but it pisses me off that there job was probably easier with my 2763 1/2 Milwaukee impact 😡 learned my lesson about leaving tools in my truck... Quote Link to comment Share on other sites More sharing options...
Der_Dachs Posted January 5, 2021 Report Share Posted January 5, 2021 I picked up a Dremel 200 at HD. One of my coworkers bought my Milwaukee M12 rotary tool basically for what I paid for it, so I pulled the trigger on the Dremel. I dont use a Dremel all the time but it is a handy tool to have around, so I went with a corded one. After I did the break in procedure, I did some light sanding and some tool sharpening with it and its a keeper. 1 Quote Link to comment Share on other sites More sharing options...
aessu Posted January 5, 2021 Report Share Posted January 5, 2021 I bought a Festool CTL 36 AC HD dust extractor, a Festool CT-VA-20 Cyclone separator and bluetooth receiver/remote kit for it. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted January 6, 2021 Report Share Posted January 6, 2021 I preordered one of Woodpeckers new combo/double squares. I went with the 12in double square option. I also got a belt for my ego snowblower. 1 Quote Link to comment Share on other sites More sharing options...
fabianjames Posted January 7, 2021 Report Share Posted January 7, 2021 my horn cutter for cattle was broke last week so i tried to fix it but it was not working properly or maybe i have been using this for cutting horns for soo long and now it was not able that we can use it so at last today i ordered a new cutter for cattle and it looks like this 2 Quote Link to comment Share on other sites More sharing options...
SharonAmanda Posted January 7, 2021 Report Share Posted January 7, 2021 This is one of those things you realize you need once you start carving skulls for the first time. You can only hold onto a Dremel for so long before the thing starts getting in your way and your fingers get tired. An rotary extension feels more like you are holding a pen and gives you more flexibility. There are only 6 items in this list, but I think this is a must for carving animal skulls. So i ordered a pair of it. Quote Link to comment Share on other sites More sharing options...
fm2176 Posted January 12, 2021 Report Share Posted January 12, 2021 I scored two new to me tools this weekend. The first is a Toledo No. 1 pipe vise from my wife's grandparents' shed. It needs cleaning but should come in handy in the shop. The second is a Jet DC-650 dust collector. We got a heads up on some free cabinets, and the shop we picked them up at (they were new but had been sitting for five years) had both a radial arm saw and a dust collector sitting outside. The shop had closed by the time we returned, and the RAS was gone (probably just moved out of the shop for the cleaning they were doing), but the dust collector was still there. One of the co-owners was still there, so I asked about it and he told me I could take it. No idea what, if anything, is wrong with it, but it was full of dust and needs to have the cord replaced. The DC-650 doesn't have the best reviews but free can't be beat. 2 Quote Link to comment Share on other sites More sharing options...
Jronman Posted January 13, 2021 Report Share Posted January 13, 2021 I ordered a second DeWALT dxst10000 shelving unit for my storage unit from Home Depot. I chose ship to store. It was much cheaper than ship to home. I also got a polishing pad for my Rotex 150 and a Surfix finish applicators set from Festoolproducts.com. I heard The Surfix system was being discontinued and wanted to give it a try before it was too late. I wanted to try to buff out finishes with my rotex and I think this kit will be a good start. I will more than likely fill the dispenser cartridges with my own finish once I use up the included Festool finish in them. 1 Quote Link to comment Share on other sites More sharing options...
Jronman Posted January 20, 2021 Report Share Posted January 20, 2021 I bought the Space Mouse Enterprise 2 kit from 3D Connexion. I wanted a 3d mouse and wanted a new regular mouse for drafting. Everything in the kit is designed for the CAD professional. I was even able to special order the kit with the left hand variant of their CadMouse. I used their 3d mouse a few years ago and I felt it increased productivity. Quote Link to comment Share on other sites More sharing options...
fm2176 Posted January 22, 2021 Report Share Posted January 22, 2021 I picked up two Packout 10" totes for $42 apiece. The 15" tote is marked down to $42 but I have yet to find any in stock. I'll probably transfer some of my electrical tools from one of the AWP totes to a Packout tote, and maybe use the other for plumbing stuff. Quote Link to comment Share on other sites More sharing options...
Jronman Posted February 2, 2021 Report Share Posted February 2, 2021 I picked up a Knipex 26 11 200 Snipe Nose Side Cutting Pliers (Stork Beak Pliers) They look like needle nose pliers to me but apparently they aren't. I'm using them like I would a pair of needle nose. I also picked up a Milwaukee Shockwave Red Helix twist drill bit set. I wanted something compatible with 1/4 hex chucks. Quote Link to comment Share on other sites More sharing options...
fm2176 Posted February 8, 2021 Report Share Posted February 8, 2021 I picked up the roofing nailer/circular saw combo I posted about in the Hitachi/Metabo forum. The saw has some neat features and seems powerful enough after using it for the first time. One day I'll get around to comparing it to the other cordless saws I have, but it didn't bog down in wet lumber like my Ridgid has in the past. Also, I used the cheap blade that came with the saw, while my other saws have Diablo 24 or 40 tooth blades. Quote Link to comment Share on other sites More sharing options...
Jronman Posted February 10, 2021 Report Share Posted February 10, 2021 I picked up a second Crescent Lufkin Tape Measure. The one I got in my ToolCrate was so nice I decided I wanted a second. The second one I got just happened to be 25'. The one from the ToolCrate is only 16' 1 Quote Link to comment Share on other sites More sharing options...
TerryOS Posted February 12, 2021 Report Share Posted February 12, 2021 Hello, today I buy Self-Leveling Rotary Laser for Bosch. I have a lot of Bosch tools with which I am satisfied, I was going to do a small modernization of the garage, and I will test it there:) 1 Quote Link to comment Share on other sites More sharing options...
Marinuer Posted February 19, 2021 Report Share Posted February 19, 2021 Just get the DEWALT Sliding Miter Saw that one of my favorite and most versatile tools. I'll' use it mainly for woodworking projects. Audit power tools always help me choose the power tool for me. Quote Link to comment Share on other sites More sharing options...
fm2176 Posted February 28, 2021 Report Share Posted February 28, 2021 On 1/22/2021 at 11:56 AM, fm2176 said: I picked up two Packout 10" totes for $42 apiece. The 15" tote is marked down to $42 but I have yet to find any in stock. I'll probably transfer some of my electrical tools from one of the AWP totes to a Packout tote, and maybe use the other for plumbing stuff. Found another tote for $12.03 this morning. Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted March 1, 2021 Report Share Posted March 1, 2021 It's amazing how cheap you are finding those totes. I haven't seen them that low. That is awesome. Quote Link to comment Share on other sites More sharing options...
fm2176 Posted March 2, 2021 Report Share Posted March 2, 2021 On 3/1/2021 at 12:01 PM, Eric - TIA said: It's amazing how cheap you are finding those totes. I haven't seen them that low. That is awesome. It really boils down to luck and having a good eye for clearance stickers. The one I picked up for under $12 was at the first store I visited. I stopped by three other stores and didn't even see a sticker. Quote Link to comment Share on other sites More sharing options...
ToolBane Posted March 2, 2021 Report Share Posted March 2, 2021 Got a few recent additions over the last month. The compact Makita impact for general light auto while the Ryobi mid-torque is mostly for setting up camps at outdoor events. Gotta say, as overjoyed as I am that Ryobi finally released a brushless impact, the compact Makita is impressive in that it hits almost as hard. That Makita is basically the size of an impact driver. The circular saw honestly I only got out of principle as I hardly ever have a need for just basic rough circular saw type tasks, but it was on sale for $150. Makita NEVER puts this model on sale, so I decided to go ahead and grab it. Blade-left, compact, I at least see being able to find occasional utility for it. It being on sale, gotta wonder if Makita is close to announcing a replacement. But honestly I’m most excited about the CXT driver. It still isn’t available in the US technically, but a vendor in the UK was willing to send to me via Amazon. It will easily become my most frequently used CXT tool. 1 Quote Link to comment Share on other sites More sharing options...
Eric - TIA Posted March 3, 2021 Report Share Posted March 3, 2021 Huge fan of the Makita impacts. Nice pick up. Quote Link to comment Share on other sites More sharing options...
stream26 Posted March 3, 2021 Report Share Posted March 3, 2021 Got my nailer and drill off the company store. Tried the ds682M1. Its awesome. Will try the drill tomorrow Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.